Page d'accueil version franηaise
2575 Roy street
Sherbrooke (Quιbec)
J1K 1B9 - Canada
Phone : (819) 563-3641
Fax : (819) 563-3638
Toll free : 1-866- 549-1111

 
 
 

Visit our subsidiary web site

Version francaise

 

Our complete range of products

 

Customizable control towers

Construction


These great looking Archimedes Consoles are made of sturdy, high grade Aluminum. They are assembled with stainless steel machine screws and plated Pem Nut threaded inserts. Full width access panels facilitate the connection of pneumatic & electrical accessories. Supplied with rubber grommet(s) & stainless steel self-drilling / self-threading screws for floor mounting.

Customization


Hundreds of top plate models are available in Mirror Finished Stainless Steel or Brushed Aluminum.
They can be customized, engraved, assembled, and supplied ready to install with all the valves & switches required for your specific application, including the necessary hardware such as fittings, contactors, breakers & terminals. Top plates are fully interchangeable between pedestal mount and floor mount consoles.

 

 

SECTION 4 – CONSOLE SIZE CHART

 

 

Dimensions (inches)

PART NO.

DESCRIPTION

Length

Width

Height

APT-A-5S

Single Width 5''

5 3/16

2 15/16

5

APT-A-5D

Double Width 5''

10 1/4

2 15/16

5

APT-A-5T

Triple Width 5''

15 3/8

2 15/16

5

APT-A-8S

Single Width 8''

5 3/16

2 15/16

8

APT-A-8D

Double Width 8''

10 1/4

2 15/16

8

APT-A-8T

Triple Width 8''

15 3/8

2 15/16

8

APT-A-12S

Single Width 12''

5 3/16

2 15/16

12

APT-A-12D

Double Width 12''

10 1/4

2 15/16

12

APT-A-12T

Triple Width 12''

15 3/8

2 15/16

12

APT-A-14L

Extra Length, Single Width 14''

7

5 3/16

14

APT-A-14WL

Extra Length, Extra Width14''

7

7 3/4

14

APT-A-14WWL

Extra Length, Double Width 14''

7

10 3/8

14

APT-A-14WWWL

Extra Length, Triple Width 14''

7

15 3/8

14

PMC-A-5

Pedestal Mount Single Width

7

5 3/16

5.5

PMC-A-7.5

Pedestal Mount Extra Width

7

7 3/4

5.5

PMC-A-10

Pedestal Mount Double Width

7

10 3/8

5.5

PMC-A-15

Pedestal Mount Double Width

7

15 3/8

5.5


  

 

Image Part number Description

APT-A-5S

 

Shown with D145 Valve and other optional accessories

(Sold separately)

 

5’’ Tall Single Width Aluminum Console

 

Will directly fit our D126 series Hoist & PTO Control Valve, or use our optional Blank Top Plate # E00 to fit other accessories.

Great choice for installation between the driver’s seat and door.

 

APT-A-5D



Shown with D137 Valve and other optional accessories
(Sold separately)
5’’ Tall Double Width Aluminum Console


Will directly fit our D126 series Hoist & PTO Control Valve, or use our optional Blank Top Plate # E00 to fit other accessories. One blank plate is included.


Great choice for installation between the driver’s seat and door.

APT-A-5T




Shown with D126 Valve and Stainless top plates
(Sold separately)
5’’ Tall Triple Width Aluminum Console
 

Will directly fit our D126 series Hoist & PTO Control Valve, or use our optional Blank Top Plate # E00 to fit other accessories. Two blank plates are included.

Great choice for installation between the driver’s seat and door.

APT-A-8S

 

Shown with D137 Valve and other optional accessories

(Sold separately)

 
8’’ Tall Single Width Aluminum Console

Will directly fit our D126 series Hoist & PTO Control Valve, or use our optional Blank Top Plate # E00 to fit other accessories.
Great choice for installation between the driver’s seat and door.

APT-A-8D

 

 


 

Shown with D126 Valve and other optional accessories

(Sold separately)

 
8’’ Tall Double Width Aluminum Console
 

Will directly fit our D126 series Hoist & PTO Control Valve, or use our optional Blank Top Plate # E00 to fit other accessories. One blank plate is included.

Great choice for installation between the driver’s seat and door.
 

APT-A-8T

 

 

 

 

Shown with D126 Valve and Stainless top plates

(Sold separately)

 

8’’ Tall Triple Width Aluminum Console

Will directly fit our D126 series Hoist & PTO Control Valve, or use our optional Blank Top Plate # E00 to fit other accessories. Two blank plates are included.


Great choice for installation between the driver’s seat and door.

APT-A-12S

 

 

 

 

Shown with D126 Valve and Stainless top plates

(Sold separately)

 

12’’ Tall Single Width Aluminum Console

 

Will directly fit our D126 series Hoist & PTO Control Valve, or use special top plates to adapt other accessories.


 

 

APT-A-12D

 

Shown with D126 Valve

(Sold separately)

 

12’’ Tall Double Width Aluminum Console

 

Will directly fit our D126 series Hoist & PTO Control Valve, or use our optional Blank Top Plate # E00 to fit other accessories. One blank plate is included.

 

Great choice for installation between the driver’s seat and door.

 

APT-A-12T

 

Shown with D126 Valve

(Sold separately)

 

12’’ Tall Triple Width Aluminum Console

 

Will directly fit our D126 series Hoist & PTO Control Valve, or use our optional Blank Top Plate # E00 to fit other accessories. Two blank plates are included.

 

Great choice for installation between the driver’s seat and door.

 

APT-A-14L

7 x 5’’ Top

 

 

Shown with D126 Valve and other optional accessories

(Sold separately)

 
14’’ Tall Aluminum Console – Single Width


Will directly fit our D126 series Hoist Control Valve with extra space for accessories. Supplied with one D00 aluminum blank top plate (4 x 5’’). If you are not using the D126 you can use the E00 or F00 top plates (reference at section 3 of this catalog.)


Our most popular size for the typical dump truck.

APT-A-14WL
7 x 7.5’’ Top




Shown with D126 Valve and other optional accessories
(Sold separately)
14’’ Tall Aluminum Console – Extra Width

Similar to model APT-A-14L, only wider for extra space.
Top plates are fully interchangeable with the PMC-A-7.5 floor-mount consoles.

Use Blank Top Plate # G00 or one of our customized models (sold separately).

When you have a lot of accessories to fit into a limited space

APT-A-14WWL

7 x 10’’ Top

 

 

 

Shown with D137 Valve and other optional accessories

(Sold separately)

 

14’’ Tall Aluminum Console – Double Width

Similar to model APT-A-14L. Top plates are fully interchangeable with model PMC-A-10 floor-mount consoles.

Use Blank Top Plate # H00 or one of our customized models (sold separately).

 

APT-A-14WWWL

7 x 15’’ Top

 

 

Shown with Custom Top Plate and other optional accessories

(Sold separately)

 

14’’ Tall Aluminum Console – Triple Width

Similar to model APT-A-14L. The widest in this series. Top plates are fully interchangeable with model PMC-A-10 floor-mount consoles.

Use Blank Top Plate # M00 or one of our customized models (sold separately).

 

Our largest off-the-shelf console.

 

PMC-A-5

7 x 5’’ Top


 

 
5’’ Wide Pedestal Mount Aluminum Console


Our pedestal consoles fit on standard tubing for easy installation. The adjustable base will tilt from 0 to 60 degrees. Wires and hoses are easily routed through the mounting tube for a clean-looking installation. Console height is 5.5’’.

Top plates are fully interchangeable with the APT-A-14L floor-mount consoles.

PMC-A-7.5

7 x 7.5’’ Top

 

 
7.5’’ Wide Pedestal Mount Aluminum Console


Similar to model PMC-A-5, only wider for extra space.

Top plates are fully interchangeable with the APT-A-14WL floor-mount consoles.

Use Blank Top Plate # H00 or one of our customized models (sold separately).

PMC-A-10

7 x 10’’ Top

 

PMC-A-15

7 x 15’’ Top

Extra Wide Pedestal Mount Aluminum Console


Similar to model PMC-A-5. Our widest models in this series.
Top plates are fully interchangeable with model
APT-A-14WWL (10’’) or APT-A-14WWWL (15’’) floor mounted consoles.
Use Blank Top Plate # H00 (10’’), # M00 (15’’) or one of our customized models (sold separately).

Enough space to fit all controls for even the most complex snow & ice control vehicle.

CUSTOM MADE POSTS

Straight or Offset
Aluminum or Painted Steel
Cut to length.
 
Please call Archimedes for your Pedestal Mounting Posts needs. Several designs are available off the shelf, or we can manufacture special models to suit your specific requirements.

You may also use locally available steel or aluminum schedule 40 tubing.

TP-A-D00
Aluminum
TP-SS-D00
Stainless Steel
4 x 5’’
Standard Top Plate for APT-A-14L or PMC-A-5

Leaves room for a D126 Valve or E00 Top Plate
One supplied with each console (aluminum).

TP-A-E00
Aluminum
TP-SS-E00
Stainless Steel
2.937 x 5’’
Top Plate for APT-A-5x, APT-A-8x and APT-A-12x


Will also fit in front of the D00 plate on a APT-A-14L
Blanks out the space normally used by a D126 Valve.
One TP-A-E00 is supplied with the double width consoles and two with the triple.

TP-A-E01
Aluminum
TP-SS-E01
Stainless Steel
2.937 x 5’’
Adaptor Plate to fit D125 Valve in lieu of D126

Supplied with the necessary mounting hardware.

TP-A-E03
Aluminum
TP-SS-E03
Stainless Steel
2.937 x 5’’
Adaptor Plate to fit D135 or D137 Valve in lieu of D126

Supplied with the necessary mounting hardware.

TP-A-F00
Aluminum
TP-SS-F00
Stainless Steel

7 x 5’’
Top Plate for APT-A-14L or PMC-A-5

Covers the entire top of those models.

TP-A-F03
Aluminum
TP-SS-F03
Stainless Steel

7 x 5’’
Adaptor Plate to fit D137 Valve on APT-A-14L or PMC-A-5

Covers the entire top of those models.

Mounting hardware included.

TP-A-G00
Aluminum
TP-SS-G00
Stainless Steel

7 x 7.5’’
Top Plate for APT-A-14WL or PMC-A-7.5

Mounting hardware included.
May require the use of a bridge, depending on the accessories used (sold separately).

TP-A-G01
Aluminum
TP-SS-G01
Stainless Steel


7 x 7.5’’
Adaptor Plate to fit D126 Valve on APT-A-14WL or PMC-A-7.5

Mounting hardware included.
May require the use of a bridge, depending on the accessories used (sold separately).

TP-A-G04
Aluminum
TP-SS-G04
Stainless Steel


7 x 7.5’’
Adaptor Plate to fit D137 Valve on APT-A-14WL or PMC-A-7.5

Mounting hardware included.
May require the use of a bridge, depending on the accessories used (sold separately).

TP-A-H00
Aluminum
TP-SS-H00
Stainless Steel

7 x 10’’
Top Plate for APT-A-14WWL or PMC-A-10

Covers the entire top of those models.
May require the use of a bridge, depending on the accessories used (sold separately).

TP-A-H01
Aluminum
TP-SS-H01
Stainless Steel

7 x 10’’
To fit D126 Valve on APT-A-14WWL or PMC-A-10

Mounting hardware included.
May require the use of a bridge, depending on the accessories used (sold separately).

TP-A-H03
Aluminum
TP-SS-H03
Stainless Steel


7 x 10’’
Adaptor Plate to fit D137 Valve on APT-A-14WWL or PMC-A-10

Mounting hardware included.
May require the use of a bridge, depending on the accessories used (sold separately).

 


History   /   Services   /   Documents   /   Products   /   Contact

Copyrights © 2007 Archimedes Pneumatics and Hydraulics Inc.